Firmware APM 2.8 quadrocopter V4 frame X650 param file Mission Planner

Firmware APM 2.8 quadrocopter V4 frame X650 param file Mission Planner is designed for the newly created quadrocopter - the flight computer Ardupilot. Ideal for a frame 600-650 mm, with 13 "and 14" louvers. For brushless motors with thrust of 3-4 kg. It has been reworked by experience and tested on several similar quadrocopters. You do not have to configure everything from the beginning, just download this flash as a param file and upload it via usb or ttl to the flight computer. Using only the minimum settings for your aircraft, you do not have to spend time to adjust all the equipment through the Mission Planer. You can read about how the quadrocopter was configured here.

Unlike the "stock version" fixed and configured:   

• Flight compass - North calibrated
• GPS-orientation by satellites
• Coordinate Coordination Moscow, Russia
• Power Meter Flow Meter
• All 4 motors have been rebuilt: YAW, Bank, Gas, Feedback - PID-regulators
• The camcorder is displayed
• Displays OSD and flight camera
• Adjustments for Gimbal Suspension
• Radiotelemetry is adjustment

Instructions for using this firmware:

• Install Mission Planner for your flight computer Ardupilot APM 2.5 and higher
• Choose a frame X4 quadrocopter (600-650 mm, suitable for Tarrot and similar)
• Connect the computer and flash Ardupilot first "native" and stock firmware
• Reload Ardupilot
• Connect the computer and flashing Ardupilot now THIS firmware (Import param-file)
• Reload Ardupilot
• Make the minimum settings in the flight program at your discretion
• Now the quadrocopter is ready for flight tests

Write a review

Your Name:


Rating: Bad            Good

Enter the code in the box below:



🚷 18.188.205.95